通过打胶机保养调试能使点胶效果更好
打胶机在现代化工业生产中的地位非常高，能通过三轴联动执行各种不同需求的点胶工作，无论封装环节，还是点胶对接环节的实用性非常强，决定产品质量好坏源于打胶机保养工作是否做好，通过
双组份打胶机保养和调试能使点胶效果更好。
Glue dispenser plays a very high role in modern industrial production. It can perform dispensing work with different demands through three-axis linkage. The practicability of both packaging and dispensing connection is very strong. The quality of products depends on whether the maintenance of the glue dispenser is well done. The maintenance and debugging of two-component glue dispenser can make the dispensing effect better.
保养保证机械臂运转流程
Maintenance and operation process of mechanical arm
打胶机保养工作可大可小，往小方面来说只需要长期对工作平面上一些异物灰尘擦去即可，如果机械手工作不够流畅，添加一点润滑油，保证“活动关节”能顺畅移动，防止出现点胶不到位的情况。
The maintenance work of the glue applicator can be large or small. To a small extent, it only needs to wipe away some foreign matters and dust on the working plane for a long time. If the manipulator is not smooth enough, add a little lubricating oil to ensure that the "movable joint" can move smoothly and prevent the situation that the glue dispensing is not in place.
每月的情形计划设定
Monthly scenario plan setting
使用打胶机的厂家每个月进行一次点胶设备大清洗工作，市面上一些大型点胶机具备自动清洗功能，而小型打胶机无法进行自动清洗，哪么就需要使用人工方式进行，所以打胶机保养需要有步骤，这样才能够把需要清洗的位置，搞干净。
The manufacturer who uses the glue dispenser shall clean the glue dispenser once a month. Some large glue dispensers on the market have the function of automatic cleaning, while small glue dispensers cannot be cleaned automatically, so manual method is required. Therefore, the maintenance of the glue dispenser needs steps, so that the positions that need to be cleaned can be cleaned.
调试与点胶环节的关系
Relationship between debugging and dispensing
调试环节跟双组份打胶机保养都是非常重要，大多数点胶参数由点胶调试环节决定的，如果在点胶工作中进行参数更改可能会造成点胶误差，调试工作可以在打胶机配备手动操作示教盒上执行，这样能够保证产品被点胶的质量。
Debugging and maintenance of two-component glue dispenser are very important. Most dispensing parameters are determined by dispensing debugging. If parameters are changed during dispensing, dispensing errors may occur. Debugging can be carried out on the manual operation teaching box equipped with the glue dispenser, which can ensure the quality of products being dispensed.
使用控制器链接PC端模拟进行，手动操作示教盒可以记录下各个工作点坐标，然后能实现高重复性阵列式排列点胶，通过PC端能修改的东西比较多，操作人员需要有一定的编程知识才行，如果调试环节做的好，哪么打胶机保养的次数可以适当降低，清洗的地方也可以减少。
Use the controller to link the PC end for simulation. The manual operation of the teaching box can record the coordinates of each working point, and then realize the highly repetitive array dispensing. There are many things that can be modified through the PC end, and the operator needs to have some programming knowledge. If the commissioning link is well done, the number of times for the maintenance of the glue dispenser can be appropriately reduced, and the cleaning place can also be reduced.
This is all for matters related to the better dispensing effect through the maintenance and debugging of the dispensing machine. If you have any doubts or needs, please come to our website at any time http://www.magic118.com Get to know!
上一篇：建议使用双组份打胶机之前先进行调试
下一篇：双组份打胶机的故障重要出自这几方面
